Reprint the set after an error
Reprint the set after an error
Introduction
A printer error can occur while printing a set. When the error causes a restart of the printer, the
set is printed only partially. Enable the setting [Reprint the complete set] to reprint the complete
set.
Procedure
1. Open the Settings Editor and go to: [Preferences]→[System settings]→[Printer settings]
2. Enable the setting [Reprint the complete set] when you want to reprint the complete set after a
restart of the printer.
Only applicable when an error caused the restart.
3. Click [OK].
74
Chapter 5 - Prepare the print system
VarioPrint 6000 line