Delete Print Jobs - Canon VarioPrint 6000 Series Operation Manual

Delete print jobs

Delete print jobs
You can remove print jobs before or after they are printed. Jobs that are not printed completely
and proof prints do not come in the list of printed jobs.
[74] Delete function and confirmation window in list of waiting jobs
NOTE
For the list of [Printed jobs], the system administrator can indicate in the Settings Editor that the
list must be cleaned automatically at specified times. The factory default is one day.
Furthermore, in the Settings Editor you can manually clean up the jobs in the lists of [Printed
jobs], [Scheduled jobs], [Waiting jobs] and the [DocBox].
IMPORTANT
When PRISMAsync does not automatically remove jobs from the list of printed jobs, make sure
you remove the printed jobs manually to prevent a full system disc.
For security reasons, the system administrator can enable the E-shredding option. E-shredding
overwrites the deleted job data and prevents the data recovery of a removed job.
You can delete jobs from the following locations:
Function
[Delete]
NOTE
You can only delete the active print job
hold. If necessary, press the Stop button
Procedure
1. Touch [Jobs].
2. Go to the location of the job.
3. Select the jobs you want to delete.
4. Touch [Delete].
5. Confirm the deletion action.
206 Chapter 9 - Carry out print jobs
Scheduled Waiting jobs
jobs
in the list of [Scheduled jobs] when the printer is on
two times to put the printer on hold.
DocBox Printed jobs
VarioPrint 6000 line