Adjust The Control Panel - Canon VarioPrint 6000 Series Operation Manual

Adjust the control panel

Adjust the control panel
You can change several settings to adjust the control panel according to your needs or workflow.
Change the display language of the control panel
1. Touch [System] -> [Setup] -> [Language].
2. Select the language.
3. Touch [OK]
Adjust the warning time
The dashboard and the operator attention light warn you when an operator intervention is
expected. You can change the warning time or disable the warning in advance.
Choose a warning time so that you have sufficient time to prepare media or remove prints
without a print system stop. The factory default is 10 minutes.
[16] Warning time setting
1. Touch [System] -> [Setup] -> [Warning time].
2. Touch [Warning in advance] to enable or disable the function.
3. Touch the - or + button to decrease or increase the warning time in increments of 1 minute.
You can set a time from 1 - 60 minutes.
4. Touch [OK].
Define the display job names
Job names can be very long. You can indicate if you want to show the job name using two lines
in the job list or how you want to truncate the name.
When you truncate a job name at the beginning, you can indicate how many characters are
removed before the truncation. When you truncate a job name at the end, you can indicate how
many characters are removed after the truncation.
64 Chapter 5 - Prepare the print system
VarioPrint 6000 line