Unpack Light-Weight Media - Canon VarioPrint 6000 Series Operation Manual

Unpack light-weight media

Introduction
Before you load media in the paper trays, unpack the media and check the stack.
Before you begin
Only unpack media just before you load the stack into the paper trays. When you leave the media
unpacked for a long period, tight edges or waviness can occur.
Procedure
Action
1 Place a ream of media on a flat surface.
2 Fold out the short sides of the packaging.
3 Open the package along the glue strip.
4 Remove the top sheet and the bottom sheet
of the stack. Inspect the four sides of the
stack for glue residue. If one of the sides
contains glue residue do not use the ream.
Remove sheets that have any of the follow-
ing types of malformation: bends, folds,
cuts, rips, crumpled edges, wavy edges,
tight edges, dog ears.
VarioPrint 6000 line
IMPORTANT
When you use a knife to open the
package be careful not to touch
the media.
Unpack light-weight media
Chapter 11 - Media handling
4
285