Handle The Media Messages In The Tray-To-Tray Mode (Pcl) - Canon VarioPrint 6000 Series Operation Manual

Handle the media messages in the tray-to-tray mode (PCL)

Handle the media messages in the tray-to-tray mode (PCL)
Procedure
1. A message on the control panel indicates that a media is missing. Select one of the following
actions as a response to the message.
• Touch [Assign media].
Continue with step two when you select this option.
• Touch [Continue].
• Touch [Cancel stream].
The print job is stopped. You can now solve the problem. You will most likely be able to solve
the problem on the server.
NOTE
The following steps two and three apply only when you chose to assign a media.
2. From the list of media, select the media that will be used as the media the controller is asking for
and touch [OK].
The media will now be displayed with the name that is defined in the media catalog.
If you do not select media from the media catalog with the requested size or name, the printer
will select a media with the default size.
3. Select the paper tray where you want to load the required media and touch [OK].
4. Load the media.
5. Close the paper tray.
6. Touch [OK].
Now you can assign other media or continue the print job.
230 Chapter 9 - Carry out print jobs
VarioPrint 6000 line