Print In Transaction Printing Mode - Canon VarioPrint 6000 Series Operation Manual

Print in transaction printing mode

Print in transaction printing mode
When the transaction mode is active, you select a transaction setup that matches your print
requirements.
When the alignment of the variable data is not correct, you adjust the image shift via the control
panel or via a transaction printing setup with a preset defined image shift. The image shift is
visible on all printed output from all paper trays.
This topic describes how to:
• Print in transaction mode
• Activate a transaction setup during transaction printing
• Switch off the transaction printing mode
[77] Transaction printing options and settings
Print in transaction mode
1. Touch [Jobs]→[Queues]→[Scheduled jobs] to empty the list of scheduled jobs, if required.
2. Touch [System]→[Transaction]→[Transaction printing mode]→[On].
3. Touch [Active transaction setup] to select a transaction setup.
4. Load the media into the paper trays, if the tray-to-tray media assignment is active.
5. Touch the + or - buttons to shift the image, if required.
6. Touch [System]→[Transaction]→[Transaction printing online]→[On].
7. Establish the connection from the host or mainframe to the print system and submit the jobs.
8. Monitor the jobs on the control panel, to make sure that all jobs are printed. Use the system
status colors to see when new media must be loaded.
216 Chapter 9 - Carry out print jobs
VarioPrint 6000 line