Troubleshooting For Light-Weight Media - Canon VarioPrint 6000 Series Operation Manual

Troubleshooting for light-weight media

Introduction
When the optional light-weight media module is installed, you can print light-weight media. Next
to the general troubleshooting, you have some additional troubleshooting related to the light-
weight media module.
This section gives an overview of the possible errors related to the light-weight media module
and the solutions to these errors.
NOTE
Only operators who received the special maintenance training are allowed to replace or clean
parts and solve paper jams in the process units.
Overview of the possible machine errors
Handle the machine errors
Error
Maintenance re-
quired: Remove
the sheets from
the TTF
Maintenance re-
quired: Replace
the air filters.
Troubleshooting for the light-weight media module
Problem
Frequent paper jam at the air guid-
ance unit.
MORPE before the job.
VarioPrint 6000 line
Solution
Follow the instructions on
the control panel.
Follow the instructions on
the control panel.
Solution
• Check the air filter of the light-weight media module.
• Check the air infrastructure and the connection to the
• Check the valve of the air infrastructure and the con-
Additional information
CAUTION
The TTF area can be hot.
The maintenance wizard appears. You need to
have access rights to perform maintenance
tasks.
In some cases you must remove the air guid-
ance unit to remove sheets under this unit.
You must visually check if you must remove
the unit, the system cannot indicate if the re-
moval is necessary.
NOTE
Only trained operators are allowed
to perform maintenance tasks.
The maintenance wizard appears. You need to
have access rights to perform maintenance
tasks.
NOTE
Only trained operators are allowed
to perform maintenance tasks.
When needed, replace the filter.
machine.
nection to the machine.
Troubleshooting for light-weight media
Chapter 14 - Troubleshooting
4
323