Define The Handling Of Media Attributes In Jdf Ticket - Canon VarioPrint 6000 Series Operation Manual

Define the handling of media attributes in JDF ticket

When you select a media in the media catalog, all media attributes need to be specified.
However, it can occur that not all media attributes in a JDF job ticket are specified. When you
allow that not all media attributes in the JDF ticket are specified, media matching is used to find
values for these attributes. The media catalog is queried with only the media attributes specified
in the ticket. The missing attributes, except the size, are filled in from the first matching media. If
no media size is specified, the size is taken from the PDL data. If no match was found in the media
catalog, a temporary media is used with the missing attributes provided by the PDL data and/or
defaults.
1. Open the Settings Editor and go to: [Media]→[Configuration].
[19] [Media] tab
2. Use the [Media attributes in JDF ticket] option to define how to handle media attributes in a
JDF ticket.
• [Allow that not all media attributes are specified]: media matching is used to find values for
these attributes.
• [All media attributes must be specified]: the attributes of the JDF ticket, the print document,
and the default media attributes are used.
3. Click [OK].
VarioPrint 6000 line
Define the handling of media attributes in JDF ticket
Chapter 5 - Prepare the print system 67