Kenwood kMix HMX75 Instructions Manual page 3

This appliance shall not be used by
l
children. Keep the appliance and its cord
out of reach of children.
Children should be supervised to ensure
l
that they do not play with the appliance.
Only use the appliance for its intended
l
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
Cleaning
Always switch off, unplug and remove the
l
beaters or kneaders before cleaning.
Never put the handmixer body in water or
l
let the cord or plug get wet.
Never use abrasives to clean parts.
l
Beaters, kneaders
Wash by hand or in your dishwasher, then
l
dry.
Handmixer body
Wipe with a damp cloth, then dry.
l
before plugging in
Make sure your electricity supply
l
is the same as the one shown on
the rear of your handmixer.
This appliance conforms to
l
EC Regulation 1935/2004 on
materials and articles intended to
come into contact with food.
before using your handmixer
for the first time
Wash the parts see 'Cleaning'.
l
key
a speed switch
b tool release button
c beaters
d cord wrap
e kneader with additional collar
f kneader without additional collar
g work top storage unit
h beater storage pillars
i kneader storage pillars
j cord tidy
to use your handmixer
1 Unwrap the cord from the cord
wrap d and make sure the speed
switch a is in the off "O" position.
2 Insert the beaters or kneaders 1 –
turn and push until a positive click
is felt.
Important: The kneader with the
additional collar e will only fit into
the larger socket.
3 Plug in.
4 With the ingredients in a bowl of an
appropriate size, place the beaters/
kneaders into the bowl.
5 Pull the speed switch a
backwards to reach the desired
speed (the first dot on the
handmixer body is the slowest
speed setting). Line up the dot on
the side of the speed switch with
the corresponding speed.
As the mixture thickens, increase
l
the speed.
3