Huawei AP4050DN Hardware Installation And Maintenance Manual page 55

AP4050DN-HD
Hardware Installation and Maintenance Guide
Figure 5-36 Skewed plastic separators
Step 5 Hold the connector with the side facing towards you, and check whether you can see the
cross-sections of the wires. Ensure that the ends of the wires are in good contact with the edge
of the RJ45, and that the contact strip blade extends beyond the ends of the wires and is
crimped with the wires. If not, replace the connector. Figure 5-37 shows an unqualified piece.
Figure 5-37 Wires not in good contact with the edge of the RJ45
----End
Testing the Connection of Assembled Cables
Context
Huawei provides two types of Ethernet cables: straight-through cables and crossover cables.

Table 5-7 Connections of core wires in a straight-through cable
RJ45 Connector 1
2
Issue 01 (2016-04-15)
Straight-through cables are connected in a one-to-one manner. They are used to connect
terminals such as a computer or switch to network devices. Table 5-7 lists the
connections of core wires in a straight-through cable.
RJ45 Connector 2
2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Core Wire Color
Orange
5 Appendix
Twisted or Not
Twisted
49