Determining The Installation Position - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide





2.4 Determining the Installation Position

Indoor APs are usually mounted on a wall or ceiling using sheet metal mounting brackets. The
installation position is determined by the site survey. There must be at least 200 mm clearance
between the cabling end of the AP and the wall. Figure 2-2 shows space requirements.
Figure 2-2 Mounting an AP
When determining the AP installation position, comply with the following rules:



Issue 01 (2016-04-15)
Quick start guide
Warranty card
MAC address label
SN label
If a PoE adapter is required, you need to purchase it separately.
If a PoE adapter is required, you need to purchase it separately.

The angle-adjustable mounting kits need to be purchased separately.

Try to reduce the number of obstacles, such as walls, between the AP and user terminals.
Place the AP far away from electronic devices that may produce radio interference, such
as microwave ovens, other APs, antennas, and other radio communication devices. For
details, see Table 2-2.
Install the AP in a hidden position that does not affect daily lives and work of residents.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
9