Huawei AP4050DN Hardware Installation And Maintenance Manual page 62

AP4050DN-HD
Hardware Installation and Maintenance Guide

Issue 01 (2016-04-15)
Figure 5-45 Installed OT terminal
Install two OT terminals on a post.
Before you install two OT terminals on a post, ensure that the two terminals can be
installed on the post and that the electrical connecting pieces have a large contact area.
Two OT terminals can be installed using any of these methods:
Bend the upper OT terminal at a 45- or 90-degree angle, as shown in Figure 5-46.
−
Cross the two terminals, as shown in Figure 5-47.
−
Figure 5-46 Bending the upper OT terminal at a 45- or 90-degree angle
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
56