Connecting The Security Lock - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide
No.
2
Pay attention to the following points when bundling the cables:





2.7 Connecting the Security Lock

There is a security slot on the device. You can lock the device to an immovable object to
prevent theft. The detailed procedures are as follows:
1.
2.
Issue 01 (2016-04-15)
Cable or Device
DC power adapter
The AP is powered by either the DC power supply or PoE power supply that backs up each other.

Different types of cables must be separately routed with the minimum spacing of 30 mm
and cannot be entangled or crossed. Cables should be parallel or separated using
dedicated separators.
Bundled cables are closely arranged, straight, tidy, and undamaged.
Cable ties are bound neatly facing the same direction, and those at the same horizontal
line must be in a straight line. Cable tie tails should be cut smoothly and evenly.
Labels or nameplates must be attached to the cables after they are installed.
Fasten the cable of the security lock to an immovable object around.
Insert the security lock into the security slot and lock it.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
length cannot exceed 100 m.
If the AP needs to connect to the Ethernet, ensure that

the Ethernet cable is working properly. If the Ethernet
cable is not working properly, for example, RJ45
connectors are short-circuited, the AP may fail to be
powered on or fail to work. Before connecting an
Ethernet cable to the AP, use the cable test tool to
check whether the cable is qualified. If the cable is
unqualified, replace it.
NOTICE
Do not insert a PoE input cable into the GE1/PoE_OUT port.
When the AP uses the DC power supply, use a power
adapter for power supply; otherwise, the AP may be
damaged.
2 AP Installation
21