Huawei AP4050DN Hardware Installation And Maintenance Manual page 17

AP4050DN-HD
Hardware Installation and Maintenance Guide
2.
3.
4.
5.
Issue 01 (2016-04-15)
Use a 6 mm drill bit to drill 25 mm to 30 mm deep holes in the drilling positions.
Hammer the expansion tubes into the holes until the expansion tubes are completely
embedded into the wall.
Fix the mounting bracket to the wall and use the Phillips screwdriver to fasten three
expansion screws into the expansion tubes.
Connect the cables. For details, see 2.6 Cable Connection.
Align the mounting screws at the rear of the AP with the mounting holes on the sheet
metal mounting bracket and then press the AP downwards to secure the AP on the
bracket.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
11