Installing The Security Lock - Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
l
l

2.7 Installing the Security Lock

There is a security slot on the AP. You can lock the AP to an immovable object to prevent the
AP against theft. The detailed procedures are as follows:
1.
2.
2.8 Checking the AP After Installation
Table 2-5
Table 2-5 AP installation checklist
No.
1
2
3
4
5
6
Issue 11 (2015-05-18)
Before removing network cables or power cables from an AP5030DN or AP5130DN,
remove the AP from the mounting bracket first to prevent damage to the network cables or
power cables.
The cable cannot exceed 100 meters.
Fasten the cable of the security lock to an immovable object around.
Insert the security lock into the security slot and lock it.
NOTE
You need to purchase the security lock separately.
shows the items to be checked after AP installation is complete.
Check Item
The AP is installed by strictly following the design draft. The installation
position meets space requirements, with maintenance space reserved.
The AP is securely installed.
The power cables and PGND cables are intact and not spliced.
Terminals of the power cables and PGND cables are welded or cramped
firmly.
All power cables or PGND cables are not short-circuited or reversely
connected and must be intact with no damage.
The power cables and ground cables are separated from other cables and
bundled separately.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 .4 G
2 .4 G
Lock hole
2 AP Installation
2 .4 G
Security lock
29