Determining The Installation Position - Huawei SUN2000-2KTL-L1 User Manual

SUN2000-(2KTL-5KTL)-L1
User Manual
Type Tools and Instruments
Heat-shrink tubing
Person
al
protecti
ve
equipm
ent
(PPE)
Safety gloves
Safety boots

4.3 Determining the Installation Position

Basic Requirements





Installation Environment Requirements



Issue 01 (2020-04-17)
Heat gun
Safety goggles
-
The SUN2000 is protected to IP65 and can be installed indoors or outdoors.
Do not install the SUN2000 in a place where personnel are easy to come into contact
with its enclosure and heat sink, because these parts are extremely hot during operation.
Do not install the SUN2000 near flammable or explosive materials.
Do not install the SUN2000 at a place within children's reach.
The SUN2000 will be corroded in salt areas, and the salt corrosion may cause fire. Do
not install the SUN2000 outdoors in salt areas. A salt area refers to the region within 500
meters from the coast or prone to sea breeze. The regions prone to sea breeze vary with
weather conditions (such as typhoons and monsoons) or terrains (such as dams and hills).
The SUN2000 must be installed in a well-ventilated environment to ensure good heat
dissipation.
When the SUN2000 is installed under direct sunlight, the power may be derated due to
the temperature rise.
You are advised to install the SUN2000 in a sheltered place or install an awning over it.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
-
Anti-dust mask
-
19