Advertisement
OCR Type A230
5.2.4
Start Type
Set the number of the type that starts up when the power is turned on.
− If you set No. 1, No. 1 will always start up when the power is turned on.
− If you set Last store type No., the type currently being inspected or the type
being set up will start up the next time the controller starts up.
When you want to start up another type on the next startup, select the type
number you want to start up and select this item.
Note
Note that if you set Last store type No., the type number at the
last point at which the data was saved is the active type number.
If you set No. 1, No. 1 will still start up even if there is no No. 1
type data.
31. Display Message
This can only be displayed when Last store type No. is set as the Start Type
setting.
− If you set Yes, when the type switch is executed, a message saying, "Data
changed, but not saved." is displayed on the screen when the switch to the
different type is complete.
− If you set No, the message above is not displayed.
In addition, if No. 1 is set as the Start Type, the message is not displayed.
5.2 Environment Settings (Environment settings common for all types)
Environment and Product Type
5 − 7
Advertisement
