Advertisement
Position and Rotation Adjustment
6.3
Setting a Position/Rotation Adjustment Checker
3.
Select Pos. Adj.
The setting menu for position adjustment using gray edge
detection is displayed. Use Select Camera to select the
camera, and Delete Checker to delete the checker as
required.
[1] POS. ROT. ADJ.
No. 1
Gray Edge :Pos. Adj.
1.
2.
3.
4.
5.
6.
7.
1.
Select Camera
Select either the camera A or camera B image for operating the Position
Adjustment checker.
2.
Horizontal Checker
3.
Vertical Checker
Use these to create the checker and set items such as the scan conditions.
4.
Priority
Use this to specify which checker result is to have priority as necessary (either
vertical or horizontal).
5.
Base Pos.
Execute a test to register the base point for adjustment.
6.
Pos.Rot. Adj. Group
Set which checker is to be used for adjustment in the case that you are using
multiple settings for position and rotation adjustment. Select a group number.
Refer to Position Adjustment Groups (page 6 − 31) for details.
7.
Delete Checker
Use this to delete a checker.
In the case that you have created both vertical and horizontal checkers, select
which one you want to delete.
Delete Checker
Both
Hor. Only
Ver. Only
Note
If you delete a Position Adjustment checker, the inspection
results for all checkers that follow the deleted checker are
cleared.
6 − 12
Jud:NG
Select Camera
Horizontal Checker
Vertical Checker
Priority
Base Pos.
(−−−−−, −−−−−, −−−−−)
Pos. Rot. Adj. Group
Delete Checker
B
Empty
Empty
0
OCR Type A230
Advertisement
