Advertisement
Position and Rotation Adjustment
6.3
Setting a Position/Rotation Adjustment Checker
5.
Set the base position.
Select Base, and press the A (Test) key to display the
current detection coordinates, detection angles and
correlation values (a maximum of five).
Set base point 1 and base point 2 from among these.
[1] POS. ROT. ADJ.
No. 1
Matching:One Chkr. Rot.
4.
No
1
2
3
4
5
[1] POS. ROT. ADJ.
No. 1
Matching:One Chkr. Rot.
4.
No
1
2
3
4
5
Select the appropriate position for base point 1 from the table
and press the ENTER key. The coordinates that you select
are registered as the base point 1 position.
Switch to the Base Point 2 table and select the appropriate
position for base point 2 from the table and press the ENTER
key. The coordinates that you select are registered as the
base point 2 position. Use the arrow keys to switch between
the base point 1 and 2 settings.
When you return to the setting menu, the adjustment
amounts (∆X, ∆Y and ∆θ) are displayed at the top right of the
screen.
Press the B key to check the base position using the image.
Press the C key to cancel the base position.
Refer to page 6 − 10 Setting the base position for details.
6 − 30
Ref. Point 1
←→: Ref. Point
Co. Y
Theta
Co. X
125.3
403.4
0.0
250.3
410.8
0.0
Ref. Point 2
←→: Ref. Point
Co. Y
Theta
Co. X
125.3
403.4
0.0
250.3
410.8
0.0
Corre.
0.61
0.89
Corre.
0.61
0.89
OCR Type A230
Advertisement
