Advertisement
OCR Type A230
6.3
Setting a Position/Rotation Adjustment Checker
The only time that it is possible for you to select the type for a Position/Rotation
Adjustment checker is when you are creating a new one. If a checker has already been
set for the number that you select, either select a new number or delete the checker set
for the selected number and perform the settings again.
6.3.1
Setting a Position Adjustment Checker that uses Gray Scale Edge
Detection
This explains how to use a Gray Scale Edge checker as an adjustment checker.
If you are unfamiliar with the operation of Gray Scale Edge checkers, read chapter 10
(Gray Scale Edge Checkers). You can set horizontal and vertical checkers, and it is
possible to use them for adjustment on their own or together. When using vertical and
horizontal checkers together, you can specify which checker has priority.
Procedure:
1.
Select the Position/Rotation Adjustment checker number.
[1] POS.ROT. ADJ.
No.
1. GRAY EDGE DETECTION
2. MATCHING
2.
Select GRAY EDGE DETECTION.
[1] POS. ROT. ADJ
No. 1
1.
TYPE[ 1] :
1
GRAY EDGE DETECTION
11. Pos. Adj.
12. Hor. Det. Rot. Adj.
13. Ver. Det. Rot. Adj.
Position and Rotation Adjustment
6.3 Setting a Position/Rotation Adjustment Checker
6 − 11
Advertisement
