Advertisement
Lead Inspection Checker
10.6
Copying and Deleting Lead Inspection Checkers
10.6 Copying and Deleting Lead Inspection Checkers
It is possible to copy and delete the settings for Lead Inspection checkers.
Copy a Lead Inspection checker
When you want to create a new Lead Inspection checker, it is possible to copy the
settings from an existing Lead Inspection checker to save time.
1.
Select LEAD INSPECTION from the Checker menu.
2.
Specify the Lead Inspection checker number.
3.
Select Copy Checker from the menu. If no checkers have
been set, the message "No checker available to copy." is
displayed.
4.
Select the number of the checker that you want to copy.
5.
The message "Overwrite existing data?" will appear. Select
YES to copy, or NO to abort the copy operation.
Delete a Lead Inspection checker
Use the following procedure to delete all settings for a Lead Inspection checker at one
time.
1.
Select LEAD INSPECTION from the Checker menu.
2.
Specify the Lead Inspection checker number.
3.
Select Delete Checker from the menu.
4.
The message "Delete?" will appear. Select YES to delete the
checker, or NO to abort the delete operation.
10 − 12
OCR Type A230
Advertisement
