Advertisement
Communications (Serial and Parallel)
16.2
Communication Settings
16.2.5
Serial Output Settings (Computer Link)
Select the data, signals and format for performing serial communication using
Computer Link.
431. Type No. Register
Specify the PLC register number in the range 0 to 9999.
When the TYPE signal is input, the product type is switched to the
number that corresponds to the value stored in the register number
specified here.
Example:
If the product type register setting is 1, and the value stored in register
DT1 is 5, then, when the TYPE signal is input, the product type will be
switched to No. 5.
432. Top Data Register
Set the top register number for use when outputting data to PLC. The
setting range is 0 to 9999.
433. Timeout
Set the maximum time to wait for a response after outputting data to the
PLC, or after requesting a product type switching number.
434. Output
Set the bit length for the output data to either 16 or 32 bits.
435. Output Char.
Set the maximum number of characters that can be recognized per a
checker.
436. Numerical Calculation
Set whether or not to output the numerical calculation results.
437. Judgment
Set whether or not to output the judgment results.
438. Char. Recog.
Set whether or not to output the recognized string.
439. PLC Type
Set the PLC type (Panasonic Industrial Devices SUNX Co., Ltd. PLC−FP series
and models from some other manufacturers are available.)
16 − 12
OCR Type A230
Advertisement
