Maintaining and servicing your device
7.6 Recycling and disposal
7.5.4.2
Installing or updating application programs and drivers
To install software from a CD and/or floppy disk in a Windows operating system, you must
connect a suitable external USB drive to the computer.
The drivers for USB floppy drives and USB CD-R drives are included in the operating system
and do not have to be installed separately.
For information about installation of SIMATIC software packages, refer to the corresponding
manufacturer documentation.
For updates of third-party drivers and application programs, contact the respective
manufacturer.
7.5.4.3
CP 1616 onboard
NDIS device driver
Read the information in the Installation_CP16xx.pdf document and on the supplied
"Documentation and Drivers" CD/DVD.
PROFINET IO
Read the information of the SIMATIC devices and SIMATIC NET documentation listed in the
section "PROFINET (Page 68)".
7.5.5
Backing up data
We recommend that you use the SIMATIC IPC Image & Partition Creator software tool for
data backups in Windows Embedded Standard 7 and Windows 7 (as of V3.4). This tool
provides convenient and efficient functions for backing up and restoring the full content of
memory cards, hard disks and individual partitions (images).
SIMATIC IPC Image & Partition Creator supports the burning of DVD media only. You can
order the tool using the Siemens online ordering system (https://mall.industry.siemens.com).
For more information about SIMATIC IPC Image & Partition Creator, refer to its product
documentation.
7.6
Recycling and disposal
The devices described in these operating instructions can be recycled thanks to their low
level of pollutants. Contact a certified disposal service company for environmentally sound
recycling and disposal of your old devices.
130
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD