Replacing The Ssd (Devices With 15", 19" Or 22" Display) - Siemens SIMATIC IPC477D Operating Instructions Manual

Maintaining and servicing your device
7.4 Installing and removing hardware
Installation
For installation, follow the steps for removal in reverse order. Insert the backup battery back
into the holder and close the device.
See also
Repair information (Page 109)
Replacing back-up battery (device with 12" display) (Page 113)
7.4.1.4

Replacing the SSD (devices with 15", 19" or 22" display)

Depending on the version ordered, an SSD may be installed in the touch device with 15",
19", or 22" display and in the touch/key device.
Requirement
● The device is disconnected from the power supply.
● The device is open, see the section "Opening the built-in unit (Page 95)".
● SSD
● T10 screwdriver
116
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD