Installing And Removing A Cfast Card; Installing And Removing A Cfast Card (External Slot) - Siemens SIMATIC IPC477D Operating Instructions Manual

6.6

Installing and removing a CFast card

6.6.1

Installing and removing a CFast card (external slot)

A slot for a CFast card is located on the bottom of the device. Installing and removing the
CFast card is the same for all device variants.
Use only SIMATIC IPC CFast cards for industrial application.
Note
Note the following points:
• Use the slot described here exclusively for a CFast card.
• Do not insert CompactFlash cards (CF cards) into the slot for the CFast card.
• Always replace the SIMATIC IPC CFast card with a SIMATIC IPC CFast card of the same
production version or higher. For the SIMATIC IPC477D, only SIMATIC CFast cards with
production version 02 or higher may be used.
The production version can be found on the SIMATIC IPC CFast card, see the section
"Accessories (Page 25)".
Requirements
● The device is disconnected from the power supply.
● PRO device only: The connection compartment cover is open (see section "Opening and
closing the terminal compartment cover (Page 62)").
● SIMATIC IPC A CFast card that is approved for industrial use.
Procedure
The procedure for installing and removing the CFast card in an external slot is the same for
all device variants.
Installation
Note
Carefully insert the CFast card into the slot without applying excess force.
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
Expanding the device and assigning device parameters
6.6 Installing and removing a CFast card
105