Table of Contents
Advertisement
7.3 Re-packing of the bushing
Overview
Procedure
1.
Put plastic wrap on the draw rod, and fix it to the transport box.
2.
Put plastic wrap on the upper draw rod and the support tubes.
3.
Lift the bushing. Refer to Lifting the bushing out of the transport box, page 15.
4.
Lower the bushing into the transport box.
Installation and commissioning guide
1ZSC000563-AAF EN, REV. 4, 2021-06-23
CAUTION!
Do not put the draw rod into the bushing, the threads on the draw rod will scratch the inside
of the center-tube.
CAUTION!
Make sure that the support blocks are in the correct positions in the transport box.
CAUTION!
Make sure that the oil valve and test tap does not make contact with the transport box, or
other objects.
71
Advertisement
Table of Contents
