8.
Tighten the draw-rod nut (10).
9.
Remove the bolts (6), washers (7) and lifting
tool (1).
10.
Remove the pull-through cord (12).
11.
Tighten the draw-rod nut, refer to Hydraulic tightening of the draw-rod nut, page 45.
End of instruction
42
NOTE!
Make sure that more than 10 mm of
the threads on the upper draw rod (35)
is remaining.
Torque
10 Nm
Installation and commissioning guide
1ZSC000563-AAF EN, REV. 4, 2021-06-23