ABB GOE 2600 Installation And Commissioning Manual page 26

5. Loosen the nut (44).
6. Turn the shaft (37) counter clockwise to remove the shaft-socket from the upper draw rod (35).
7.
Remove the hydraulic jack (38) from the bushing.
8.
Apply Molykote Multilub to the threads on the
pull-through cord (12), then connect it to the upper
draw rod.
26
NOTE!
The terminal on the pull-through
cord (12) has M8 threads.
NOTE!
Or use a lubricant with equal properties
to Molykote Multilub.
Installation and commissioning guide
1ZSC000563-AAF EN, REV. 4, 2021-06-23