Advertisement
Figure 16
6.
Connect the battery, lower the hood, and perform
the hydraulic-pressure test; refer to
the Battery (page
and
Testing the Hydraulic Pressure (page
Preparing the Traction Pump
Machines with and without the Optional Road
Light Kit
1.
At the right side of the traction pump, assemble
the test equipment onto the quick-connect fitting
(Figure
17).
Figure 17
2.
Connect the battery, lower the hood, and perform
the hydraulic-pressure test; refer to
the Battery (page
and
Testing the Hydraulic Pressure (page
Connecting
9),
Closing the Hood (page
Connecting
9),
Closing the Hood (page
Preparing to Test the
Hydraulic Pressure
Models 31657 and 31659
Installing the Quick-Connect
Fitting
Machines with the Optional Road Light
Kit—and without the Optional Differential-Lock
g344403
Kit
1.
At the right side of the traction pump, remove
the 3-pin connector labeled
SENSOR
(Figure
9),
10).
1. 3-pin connector (labeled
g344318
BRAKE PRESSURE SENSOR
2.
Remove the brake-pressure transducer
19) from the reducer fitting (3/4 x 7/16 inch).
9),
10).
7
BRAKE PRESSURE
from the brake-pressure transducer
18).
Figure 18
2. Brake-pressure
)
transducer
g343559
g344072
(Figure
Advertisement
