Advertisement
Figure 36
1. 3-pin connector (labeled
BRAKE PRESSURE SENSOR
Installing the Dust Cap
Machines without the Optional Road Light Kit
or the Optional Differential-Lock Kit
1.
At the right side of the traction pump, remove
the test equipment from the quick-connect fitting
(Figure
37).
Figure 37
2.
Assemble the dust cap over the quick-connect
fitting
(Figure
38).
2. Brake-pressure
)
transducer
g344072
Installing the Dust Cap
Machines with the Optional Differential-Lock
Kit
1.
Raise the operator's platform; refer to the
Operator's Manual.
2.
Remove the test equipment from port-TPB of
the front traction manifold
g343559
3.
Install the dust cap over the Minimess fitting in
port-TPB
g344105
13
Figure 38
(Figure
Figure 39
(Figure
40).
g344079
39).
g344124
Advertisement
