Advertisement
7.
Plug the 2-socket connector
into the 2-pin connector of the coil
8.
Repeat steps
1
through
rear traction manifold.
Installing the
Quick-Connect Test Fitting
Machines without the Optional
Road Light Kit or Differential-Lock
Kit
Installing the Quick Connect
Fitting
Model 31654
1.
At the right side of the traction pump, remove
the plug from the T-fitting in port-B of the traction
pump
(Figure 7
and
REVERSE SOLENOID
(Figure
7
at the other side of the
Figure
8).
Figure 7
6).
1. T-fitting (port-B—traction
pump)
2. Plug
2.
Assemble the adapter fitting (1/4 x 7/16 inch)
into the T-fitting
3.
Torque the assemble the adapter to 34 to 41
g344293
N∙m (25 to 30 ft-lb).
4.
Assemble the quick-connect fitting into the
adapter fitting
1. Adapter fitting
2. Quick-connect fitting
4
Figure 8
3. Adapter fitting (1/4 x 7/16
inch)
(Figure
8).
(Figure
9).
Figure 9
3. Dust cap
g344289
g344290
Advertisement
