Advertisement
5.
Torque the quick-connect fitting to 27 N∙m (20
ft-lb).
6.
Assemble the retainer of the dust cap onto the
quick-connect fitting
7.
You will install the cap over the fitting in
the Dust Cap (page
Installing the Quick Connect
Fitting
Models 31657 and 31659
1.
At the right side of the traction pump, remove the
plug from port-MB of the traction pump
9
and
Figure
11).
Figure 10
(Figure
9).
Installing
11).
(Figure
g343559
1. Port-MB (traction pump)
2. Plug
2.
Assemble the reducer fitting (3/4 x 7/16 inch)
into port-MB of the traction pump
3.
Torque the reducer fitting to 81 N∙m (60 ft-lb).
4.
Assemble the quick-connect fitting into the
reducer fitting
1. Reducer fitting
2. Quick-connect fitting
5.
Torque the quick-connect fitting to 27 N∙m (20
ft-lb).
5
Figure 11
3. Reducer fitting (3/4 x 7/16
inch)
(Figure
(Figure
12).
Figure 12
3. Dust cap
g344078
11).
g344075
Advertisement
