Table of Contents
Advertisement
February 2009
Entering General
Information (cont.)
5-6
3. The next prompt asks for the starting date and time.
a. Press
[ENTER]
to enter the text box. The meter highlights the
first number. Use the [ ] and [ ] keys to scroll to any number
you wish to change, or the [ ] key to scroll to the time box.
b. Use the numeric keys to enter the desired number.
Use the [
] or [
to the desired number. (For example, if the text box displays
09, pressing the [
Scroll from 01 to 12 for the month and from 01 to 31 for the
day (depending on the number selected for the month).
c. In either case, press
4. Follow the same procedure to enter the end date and time.
Note: A circular log does not have an end time, but a number of
records. If you select a circular log, Number of Records
replaces End. To edit the number of records, scroll to Number
of Records and press
parameter and press
5. The final prompt in this window asks for the logging interval.
a. Press
[ENTER]
to open the text box.
b. Use the numeric keys to enter the desired interval in seconds.
c. Press
[ENTER]
to confirm the entry.
6. You have completed entering parameters in this window. To select
the measurements,
a. Press the [
] key to return to the Format prompt.
b. Then press the [
c. Finally, press the [ ] key to move to the Measurements tab,
[ENTER]
and press
. The Measurements window appears similar
to Figure 5-7 on page 5-7.
To step through each entry, press the [ ] key.
or
] arrow keys to scroll, in 1-digit increments,
] key twice changes the number to 07.)
[ENTER]
to confirm the entry.
[ENTER]
. Type the value for that
[ENTER]
again.
] key to return to the General tab.
Logging Data
Advertisement
Table of Contents
