Table of Contents
Advertisement
February 2009
Entering Fluid Types and
Speeds
1-14
To access the Fluid option, scroll to the Fluid entry on the Program
[ENTER]
Menu and press
. (If you are already in the Transducer/Pipe
form, press the [ ] arrow key to reach the Fluid window, and press
[ENTER]
.)The screen appears similar to Figure 1-12 below. To step
through each parameter, press the [ ] key. Refer to the Program
Menu Map, Figure 1-34 on page 1-37.
Transducer Pipe
Sound Speed
Transducer Pipe Fluid Path
Sound Speed
Figure 1-12: Fluid Type Options
To select the fluid:
1. Press
[ENTER]
to open the drop-down menu.
2. Use the [ ] key to scroll to the appropriate option.
3. Press
[ENTER]
to confirm your selection.
Note: If you select
Air
or
and suggests a value for K/V x 10
change the value of K/V x 10
If you select Other, you must enter values for Sound Speed
and for K/V x 10
Sound Speeds and Pipe Size Data).
Transducer/Pipe
Fluid
Path
Fluid
Other
600 m/s
-6
K/V x 10
14.607
Cancel
OK
Transducer/Pipe
Fluid
Other
Other
Air
-6
K/V x 10
Natural Gas
Cancel
OK
Natural Gas
, the meter sets the soundspeed
-6
. If you wish, you can
-6
.
-6
(see Installation Reference #914-004,
Programming Site Data
2
m /s
Advertisement
Table of Contents
