Table of Contents
Advertisement
Entering a Calibration
Factor (cont.)
Programming Site Data
6. Press
[ENTER]
to open the table (similar to Figure 1-33 below).
Edit KFactor Table
Data Source
1
2
3
4
5
Figure 1-33: KFactor Table
7. Use the four arrow keys to move to the desired entry in the table.
8. Use the numeric keys to enter the desired value for the data
[ENTER]
source, and press
9. Press the [ ] key to move to the KFactor column. Use the
numeric keys to enter the desired value, and press
confirm the entry.
10.Repeat steps 7, 8 and 9 for the remainder of the table.
11.When you have completed entering values, press
confirm the table and return to the Correction Factors window.
You have completed entering data for correction factors.
•
To confirm the entries and return to Operate mode, press
The CTF878 returns to Operate Mode.
•
To leave the window without confirming the entries, press
[ESC]
(Cancel) or the
key. The CTF878 returns to Operate Mode.
To aid in following the programming instructions, a complete menu
map of the User Program is included in Figure 1-34 on page 1-37,
Figure 1-35 on page 1-38 and Figure 1-36 on page 1-39.
KFactor
Cancel
OK
to confirm the entry.
[F3]
February 2009
0
[ENTER]
to
(OK) to
[F3]
(OK).
[F2]
1-35
Advertisement
Table of Contents
