Table of Contents
Advertisement
February 2009
Customizing Softkeys
(cont.)
Accessing Meter Data —
The About Option
2-10
•
To clear a softkey:
1. From the Site Menu (shown in Figure 2-6 on page 2-6), use the
[
] or [
] arrow keys to move to the FKeys entry on the menu.
[ENTER]
Press
. The screen now appears similar to Figure 2-8 on
page 2-8.
2. Use the [
] or [
] arrow keys to move to the desired Clear FKey
(1, 2 or 3) entry on the menu. Press
The softkey window clears. You can also clear the softkey through the
Configure FKey window, by selecting (
[ENTER]
[F3]
and then
(OK).
Note: Since the customized softkeys are saved globally, they will
remain, even if you change site files.
The About option displays useful information concerning the model
number and software version of any given CTF878. While the
window normally appears briefly at startup, users might want to
access the information for a longer period. To open the About
window, scroll to the About option on the Site Menu and press
[ENTER]
. The screen appears similar to Figure 2-11 below. To access
data on your specific CTF878, press [F2] (Next).
g
GE Sensing
CTF Flowmeter
Copyright ©2002 General Electric Co.
All rights reserved.
This product is protected by copyright law
and international treaties.
Unauthorized distribution, decompilation,
or reverse engineering may result in
severe civil and criminal penalties.
Figure 2-11: The About Window
To return to Operate Mode, press
[ENTER]
.
Clear
) as an entry, pressing
Next
Exit
[ESC]
[F3]
or
(Exit).
Displaying and Configuring Data
Advertisement
Table of Contents
