Table of Contents
Advertisement
Specifying the Number of
Displayed Parameters
Displaying and Configuring Data
As mentioned earlier, the CTF878 can display one to four different
measurement parameters simultaneously. However, sometimes you
might wish to display only one or two parameters. To change the
number of open display windows from within the Site Menu (shown
in Figure 2-6 on page 2-6), use the [
the desired number of views (1 View, 2 Views, etc.). Press
The screen displays the designated number of windows. For
example, Figure 2-7 below shows the screen displayed in Figure 2-3
on page 2-3, reconfigured for a single view.
Site
Program Meter Logging Service
0
10000
5000
2000
-2000
-5000
-10000
Figure 2-7: Display Screen Configured for Single View
Note: The CTF878 opens display windows from left to right and
from top to bottom, starting from the upper left; that is, if you
press "1 View," the parameter displayed in the upper left
window appears. If you press "2 Views," the parameters
shown in the two top windows appear. The view for "3 Views"
adds the window in the lower left, and that for "4 Views" adds
the window in the lower right.
]or [
] arrow keys to move to
Velocity, m/s
10 Minutes
Save Now
February 2009
[ENTER]
.
2-7
Advertisement
Table of Contents
