Table of Contents
Advertisement
February 2009
Entering Date and Time
(cont.)
Changing Date and Time
Appearance
4-4
Pressing the [
] or [
] arrow keys causes the meter to scroll within
the Meter Settings options.
•
To confirm the entries and return to Operate mode, press
The CTF878 returns to Operate Mode.
•
To leave the window without confirming the entries, press
[ESC]
(Cancel) or the
key. The CTF878 returns to Operate Mode.
In addition to setting the correct date and time, you can also change
its presentation to suit local preferences. You can select a time display
of AM/PM or 24-hour time.
To alter the time and date display:
1. From the Meter menu, scroll to the Locale tab and press
The Display Options window opens on the Locale tab, as shown in
Figure 4-3 below. To step through each parameter, press the [
key.
Locale
Display
Separators:
Date
/
Date Format
Time Format
Date/Time, Decimal Formats:
2003/08/08 06:56:51 AM, 123.45
Figure 4-3: Display Options Window - Locale Tab
Display Options
Time
:
Decimal
YYYY/MM/DD
12 Hour
Cancel
Programming Meter Settings
[F3]
(OK).
[F2]
[ENTER]
.
]
.
OK
Advertisement
Table of Contents
