Table of Contents
Advertisement
• Make sure that the paper guides are set correctly. To print with the MP
tray, you also need to select the paper size in the USE MP TRAY menu.
(➞2-48)
• Make sure that the paper is loaded correctly and that the leading edge
is fully inserted into the fax unit.
• Make sure that the paper sensor is resting on top of the paper. (The
paper sensor must rest on top of the paper, not just touch the edge of
the paper.)
• To avoid damaging the MP tray, close it when not in use. Remove and
store any remaining print media. Slide the extension tray in before
closing the MP tray.
Chapter 2
PAPER SENSOR
ACCEPTABLE
NOT ACCEPTABLE
Setting Up
2-47
Advertisement
Table of Contents
