1. Manuals
  2. Brands
  3. Canon Manuals
  4. Fax Machine
  5. PowerShot G3
  6. Service manual

Canon Super G3 Service Manual

Fax board-ad2
Hide thumbs Also See for Super G3:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Instruction Manual
Super G3 FAX Board-AD2
Service Manual Rev.0
Product Outline
Technology
Parts Replacing and Cleaning
Error Code
Service Mode
Installation
1
2
3
4
5
6

Advertisement

Table of Contents
loading

Related Manuals for Canon Super G3

Summary of Contents for Canon Super G3

  • Page 1 Super G3 FAX Board-AD2 Service Manual Rev.0 Product Outline Technology Parts Replacing and Cleaning Error Code Service Mode Installation...
  • Page 2 This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may changes in the contents of this manual over a long or short period, Canon will issue a new not be copied, reproduced or translated into another language, in whole or in part, without the edition of this manual.
  • Page 3 Explanation of Symbols The following rules apply throughout this Service Manual: The following symbols are used throughout this Service Manual. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with reference to the timing of Symbols Explanation Symbols...

  • Page 4: Table Of Contents

    Contents Setting of Bit Switch --------------------------------------------------------------- 5-3 Outline ----------------------------------------------------------------------------------------- 5-3 Back-Up ------------------------------------------------------------------------------ 5-4 Service Label ----------------------------------------------------------------------- 5-4 Details of Service Mode -----------------------------------------------------5-5 Product Outline #SSSW ------------------------------------------------------------------------------- 5-5 SSSW Composition ------------------------------------------------------------------------ 5-5 Specifications ------------------------------------------------------------------1-2 Details ----------------------------------------------------------------------------------------- 5-5 Basic Construction ------------------------------------------------------------1-3 #MENU ------------------------------------------------------------------------------5-15 Overview ----------------------------------------------------------------------------- 1-3 Menu Switch Composition ---------------------------------------------------------------5-15 Details ----------------------------------------------------------------------------------------5-15...
  • Page 5 Counters -------------------------------------------------------------------------------------5-42 Installing the Speaker ---------------------------------------------------------------- 9 Clearing Counters -------------------------------------------------------------------------5-43 Operation Setting --------------------------------------------------------------12 #LMS ---------------------------------------------------------------------------------5-43 Type Setting -------------------------------------------------------------------------- 12 Configuration --------------------------------------------------------------------------------5-43 Basic Setting ------------------------------------------------------------------------- 12 Outline ----------------------------------------------------------------------------------------5-44 Fax Communication Test ---------------------------------------------------------- 13 Details ----------------------------------------------------------------------------------------5-44 Method of confirming license option --------------------------------------------------5-44 Inactivity of the transmitted license----------------------------------------------------5-44 Erasing a License--------------------------------------------------------------------------5-46 #E-RDS ------------------------------------------------------------------------------5-47...

  • Page 6: Product Outline

    Product Outline ■ Specifications Product Outline Product Outline...
  • Page 7 256 gradations Recording unit maximum reception size: A4 (297 mm x 210 mm) scanning line density: 600 dpi x 600 dpi Memory image memory (Canon Fax Standard Chart No.1): 1000 prints storage: JBIG Extension telephone connection Answering machine connection Fax/Tel switch-over...
  • Page 8 As for image transmission speed, it is capable of communicating at 33.6 kbps (max.) thanks to a modem for V.34, which comply with ITU-T standard. F-1-1 [1] Super G3 FAX Board-AD2 [2] Speaker unit Product Outline Product Outline > Basic Construction > Overview...

  • Page 9: Basic Construction

    Technology ■ Basic Construction ■ Controls Technology Technology...

  • Page 10: Basic Construction

    As for image transmission speed, it is capable of communicating at 33.6 kbps (max.) thanks to a modem for V.34, which comply with ITU-T standard. Main controller Modular PCB G3 FAX PCB FAX interface Speaker F-2-2 F-2-1 [1] Super G3 FAX Board-AD2 [2] Speaker unit Technology Technology > Controls > FAX communication control...

  • Page 11: Parts Replacing And Cleaning

    Parts Replacing and Cleaning ■ Parts List ■ Parts Replacing Parts Replacing and Cleaning Parts Replacing and Cleaning...

  • Page 12: Pcbs

    Parts Replacing and Cleaning > Parts List > PCBs Parts List PCBs F-3-1 Name Reference Adjastment during parts replacement Super G3 FAX Board-AD2 (Refer to page 3-3) Speaker unit (Refer to page 3-6) Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts List > PCBs...

  • Page 13: Parts Replacing

    Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts Replacing > Removing the Fax Unit > Procedure Parts Replacing NOTE: Disconnect and then connect the Reader Power Supply Cable only in the case of iR- ADV C9075 PRO/C9070 PRO/C9065 PRO/C9060 PRO series and iR-ADV C7065/ Removing the Fax Unit C7055 series.
  • Page 14 Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts Replacing > Removing the Fax Unit > Procedure 4) Disconnect the Arrestor Cable [1] and the Speaker Cable [2]. 6) Remove the Cover Support Plate [1]. • 2 Wire Saddles [3] •...
  • Page 15 Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts Replacing > Removing the Fax Unit > Procedure 8) Remove the Fax Unit [1]. CAUTION: • 2 Screws [2] • Install the Fax Unit [1] while paying attention not to trap the cables of the unit. F-3-10 •...

  • Page 16: Removing The Speaker Unit

    Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts Replacing > Removing the Speaker Unit > Procedure Removing the Speaker Unit 3) Remove the Toner Container Replacement Unit Inner Cover [1]. • 4 Screws [2] ■ Procedure • 2 Claws [3] 1) Open the Front Cover [1] and the Front Upper Cover [2].
  • Page 17 Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts Replacing > Removing the Speaker Unit > Procedure 5) Remove the Speaker Unit [1]. CAUTION: • 2 Screws [2] • When installing the Toner Container Replacement Unit Inner Cover [1], be sure to install it while the 4 Parallel Pins [2] of the Inner Door Link Shaft are tilted at an angle of approx.

  • Page 18: Error Code

    Error Code ■ Overview ■ User Error Code ■ Service Error Code Error Code Error Code...
  • Page 19 Error Code Error Code > Overview > Guide to Error Code Overview - Decrease the transmission start speed. Decrease the transmission start speed in user mode: System Settings > Communications Guide to Error Code Settings > Fax Settings > Send Start Speed. When the Board has been installed and '1' is set for service data #1 SSSW SW01 bit 0, - Make the TCF evaluation standards lenient.
  • Page 20 Error Code Error Code > Service Error Code User Error Code Service Error Code Description Description #001 [T] an original has jammed. ##100 [T] at time of transmission, the procedural signal has been transmitted more than specified. #003 [T/R] tine-out for copying or sending/receiving a single page has occurred. #005 [T/R] time-out for initial identification (T0/T1) has occurred.
  • Page 21 Error Code Error Code > Service Error Code Description Description ##670 [T] at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected to be ##773 [T] at time of ECM transmission, the procedural signal has been transmitted more than detected, and the CI signal is expected to be transmitted in response;...

  • Page 22: Service Mode

    Service Mode ■ Outline ■ Details of Service Mode Service Mode Service Mode...

  • Page 23: Outline Of Service Mode

    Service Mode Service Mode > Outline > Outline of Service Mode Outline #CODEC This is a setting items related to CODEC. Outline of Service Mode #SYSTEM The items that follow may be checked/set using the machine's service mode, which is This is a setting items related to SYSTEM.

  • Page 24: Using The Mode

    Service Mode Service Mode > Outline > Setting of Bit Switch > Outline Using the Mode Setting of Bit Switch ■ Outline <Operation at the time of Bit SW> <Operation at the time of Parameter> Bit Switch Composition 1) Selecting Service Mode 1) Selecting Service Mode The items registered and set by each of these switches comprise 8-bit switches.

  • Page 25: Back-Up

    Service Mode Service Mode > Outline > Service Label Back-Up Service Label At time of shipment from the factory, all machines are adjusted individually, and adjustment The item of service label is described below. values are recorded in their respective service labels. In this machine, the output of the service label does not support.

  • Page 26: Details Of Service Mode

    Service Mode Service Mode > Details of Service Mode > #SSSW > Details Details of Service Mode ■ Details ● SSSW-SW01 #SSSW List of Functions Function ■ SSSW Composition service error code output not output not used NOTE: not used This document describes the default settings for the system for USA.
  • Page 27 Service Mode Service Mode > Details of Service Mode > #SSSW > Details ● SSSW-SW03 NOTE: List of Functions Any of the following error code may be indicated because of an echo at time of reception Function ##0005, ##0101, ##0106, ##0107, ##0114, ##0200, ##0201, ##0790 TCF criteria Loose Normal...
  • Page 28 Use it specify whether or not to transmit bit 33 and thereafter for the DIS signal. select '1500 ms.' If ‘prohibit’ is selected, Super Fine reception from a non-Canon machine can no longer be Detailed Discussions of Bit 5 used.
  • Page 29 Service Mode Service Mode > Details of Service Mode > #SSSW > Details ● SSSW-SW06 Time-Out Length for Transmission/reception List of Functions Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Function 8min. not used 16min. not used 32min. not used 64min.
  • Page 30 Service Mode Service Mode > Details of Service Mode > #SSSW > Details ● SSSW-SW013 ● SSSW-SW15 List of Functions List of Functions Function Function not used not used not used not used Convert "inch" into "mm" when transmitting the convert do not convert Reception of call through caller ID display line...
  • Page 31 Service Mode Service Mode > Details of Service Mode > #SSSW > Details 5-10 Detailed Discussions of Bit 1 Detailed Discussions of Bit 0 For reception, the length of time during which the absence of the carrier is detected between Selects the transmission telephone number displayed on reports after the completion of DCS and TCF may be set.
  • Page 32 Service Mode Service Mode > Details of Service Mode > #SSSW > Details 5-11 Detailed Discussions of Bit 2 ● SSSW-SW32 If ANSam signal is not received during transmission, select whether to use the V.8 protocol List of Functions when the other fax machine declares the V.8 protocol in DIS signal. If NO is selected, the CI Function signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies the V.8 not used...
  • Page 33 Service Mode Service Mode > Details of Service Mode > #SSSW > Details 5-12 ● SSSW-SW34 ● SSSW-SW35 List of Functions List of Functions Function Function Display the waste toner full warning 0 e-RDS function ON/OFF Waste toner container 1 Call button function ON/OFF replacement required E019 displayed on 2 ScanToMeia function enable/disable...
  • Page 34 Service Mode Service Mode > Details of Service Mode > #SSSW > Details 5-13 ● SSSW-SW37 Detailed Discussions of Bit 5 List of Functions You can select whether to stop the scan job at the time of device log logout. Function Selecting "1"...
  • Page 35 Service Mode Service Mode > Details of Service Mode > #SSSW > Details 5-14 Detailed Discussions of Bit 6 You can set to display/hide the menu of "Initialization after replacement of the Multi-purpose Tray Pickup Roller/Separation Pad". Detailed Discussions of Bit 7 You can set to display/hide the menu of "Initialization after replacement of the Transfer Static Eliminator".

  • Page 36: Menu

    Service Mode Service Mode > Details of Service Mode > #MENU > Details 5-15 #MENU ● 007: ATT transmission level Use it to set the transmission level (ATT). ■ Menu Switch Composition Raise the transmission level if errors occur frequently at time of communication because of the condition of the line.

  • Page 37: Numeric

    Service Mode Service Mode > Details of Service Mode > #NUMERIC > Numerical Parameter Composition 5-16 #NUMERIC Item Range of settings Communication termination timer from start to completion of the 0 to 65535 sec ■ Numerical Parameter Composition transmission of SMTP transmission data Communication termination timer from start to completion of the 0 to 65535 sec Item...

  • Page 38: Details

    Service Mode Service Mode > Details of Service Mode > #NUMERIC > Details 5-17 ■ Details ● 010: line connection identification length Use it to set the time for identifying the line connection. Raise this parameter if errors occur ● 002:RTN transmission condition (1), frequently at time of communication because of the condition of the line.
  • Page 39 Service Mode Service Mode > Details of Service Mode > #NUMERIC > Details 5-18 ● 023:CNG detention level for fax/tel switchover 056: Use it to indicate the type of software counter 1 of the control panel. The type of soft counter 1 cannot be changed.
  • Page 40 Service Mode Service Mode > Details of Service Mode > #NUMERIC > Details 5-19 Print system Print system 1-sided 2-sided 1-sided 2-sided Counter type Counter type 203 Copy(L) * 101 Total1 1 1 1 1 204 Copy(S) 102 Total2 1 1 1 1 205 CopyA (Total1) 103 Total (L) * 206 CopyA (Total2)
  • Page 41 Service Mode Service Mode > Details of Service Mode > #NUMERIC > Details 5-20 Print system Print system 1-sided 2-sided 1-sided 2-sided Counter type Counter type 319 Print (Bk/L) * 809 Report print (Bk1) 320 Print (Bk/S) 810 Report print (Bk2) 329 Print (Bk/L/2-sided) * 815 Report print (Bk/L) * 330 Print (Bk/S/2-sided)
  • Page 42 Service Mode Service Mode > Details of Service Mode > #NUMERIC > Details 5-21 Scan system ● 064: Communication termination timer at POP reception protocol level 1-sided Communication termination timer at POP reception protocol level can be set. ● 065: Communication termination timer at FTP transmission protocol level Counter type Communication termination timer at FTP transmission protocol level can be set.

  • Page 43: Scan

    Service Mode Service Mode > Details of Service Mode > #SCAN > Setting of Scanner Functions (SCANNER) 5-22 #SCAN Initial Appropriate Item1 Description setting guideline #SCAN 193: 0: LEGAL ADF special paper, standardized size: ■ Setting of Scanner Functions (SCANNER) NUMERIC 1: FOOLSCAP LGL misidentification-ready...
  • Page 44 Service Mode Service Mode > Details of Service Mode > #SCAN > Setting of Scanner Functions (SCANNER) 5-23 Initial Appropriate Initial Appropriate Item1 Item2 Item3 Item4 Description Item1 Item2 Item3 Item4 Description setting guideline setting guideline READER ADJUST ADJ-XY ADJ-X-MG 0 -10 to +10, Fine adjustment of READER DISPLAY...
  • Page 45 Service Mode Service Mode > Details of Service Mode > #SCAN > Setting of Scanner Functions (SCANNER) 5-24 Initial Appropriate Initial Appropriate Item1 Item2 Item3 Item4 Description Item1 Item2 Item3 Item4 Description setting guideline setting guideline READER ADJUST MTF3-S2 not used READER FUNCTION INSTALL STRD-POS not used CCD-ADJ...
  • Page 46 Service Mode Service Mode > Details of Service Mode > #SCAN > SCAN SW 5-25 ■ SCAN SW Initial Appropriate Item1 Item2 Item3 Item4 Description setting guideline ● SW05 FEEDER ADJUST DOCST -50 to 50 Adjusting the original stop position for ADF pickup Paper size type setting for DF (original tray pickup) -30 to 30...

  • Page 47: Scan

    Service Mode Service Mode > Details of Service Mode > #SCAN > Numeric Parameter Settings (Numeric Prama.) 5-26 ■ Numeric Parameter Settings (Numeric Prama.) ● 148: Leading edge frame length when performing copy operation using the ADF (0.1 mm) ● 033Vertical scan magnification correction As the value is incremented by 1, the image position moves to the trailing edge side by 0.1mm.

  • Page 48: Reader

    Service Mode Service Mode > Details of Service Mode > #SCAN > READER 5-27 ● 195: ADF special standard-sized paper: LTR_R misidentification- ■ READER ready ● #SCAN> READER> DISPLAY> CCD> TARGET-B Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because Target value of shading for blue it is misidentified as "LTRR").
  • Page 49 Service Mode Service Mode > Details of Service Mode > #SCAN > READER 5-28 ● #SCAN> READER> I/O> R-CON> P001 ● #SCAN> READER> ADJUST> ADJ-XY> ADJ-X Display of I/O port of the Reader Controller PCB (Reader Assembly) Adjustment of scanning system image lead edge position. (image's scan-start position in Display the I/O state of the sensor of the reader unit.
  • Page 50 Service Mode Service Mode > Details of Service Mode > #SCAN > READER 5-29 ● #SCAN> READER> ADJUST> ADJ-XY> ADJ-S ● #SCAN> READER> ADJUST> CCD> W-PLT-X Adjustment of CIS scan-start cell position. (image scan-start position in horizontal scanning White label data entry with standard white plate. direction) ●...
  • Page 51 Service Mode Service Mode > Details of Service Mode > #SCAN > READER 5-30 ● #SCAN> READER> FUNCTION> CCD> CCD-ADJ ● #SCAN> READER> FUNCTION> MISC-R> SCANLAMP Gain adjustment of analog processor block (on CCD PCB). The test checks to see if the scanning lamp is on or not. The gain of LED of CIS is corrected to set the CIS parameter automatically.

  • Page 52: Feeder

    Service Mode Service Mode > Details of Service Mode > #SCAN > FEEDER 5-31 ■ FEEDER ● #SCAN> FEEDER> FUNCTION> SL-CHK Checking the ADF solenoid. ● #SCAN> FEEDER> ADJUST> DOCST Specify a solenoid to perform a solenoid check. Select #SCAN>FEEDER > FUNCTION > SL- Adjusting the original stop position for ADF pickup (original tray pickup).

  • Page 53: Print

    Service Mode Service Mode > Details of Service Mode > #PRINT > Numeric Parameter Settings (Numeric Prama) 5-32 #PRINT Item Default Setting range Function #PRINT 149: 1000 488 to 1511 Adjustment of the point to start writing in NUMERIC main scanning direction (A-C) ■...

  • Page 54: Service Soft Switch Settings (Printer)

    Service Mode Service Mode > Details of Service Mode > #PRINT > Service Soft Switch Settings (PRINTER) 5-33 ■ Service Soft Switch Settings (PRINTER) Item1 Item2 Item3 Default Setting range Function #CST CAS1 CAS1-U1 26: OFI, 37: M-OFI, 24: FLSP, 25: A-FLSP, 42: FA4, Cassette 34: G-LGL 0: default 1paper size...

  • Page 55: List Of Functions

    Service Mode Service Mode > Details of Service Mode > #PRINT > List of Functions 5-34 fixed toner on paper to be fused and adhered to drum, selecting "Yes" will clean the drum by ● 054: Margin adjustment at the trailing edge of the copy forming a black band on the drum surface during the reverse rotation which is performed after Adjust the margin at the trailing edge of the copy.
  • Page 56 Service Mode Service Mode > Details of Service Mode > #PRINT > List of Functions 5-35 ● 063:Temperature adjustment UP/DOWN mode. (For rough paper) ● 134: Laser light intensity adjustment (normal speed) The temperature adjustment offset relative to the target fixing temperature of thick paper can Use this mode when reproductivity of thin lines is poor or a problem occurs to laser power (light be changed in steps of 3˚C.
  • Page 57 Service Mode Service Mode > Details of Service Mode > #PRINT > List of Functions 5-36 ● 146: Adjustment of the magnification to write image in laser's main ● 154: Adjustment of the registration loop volume (Thick paper) scanning direction (A-C) Incrementing the value by 1 feeds the paper 0.1 mm further and increases the registration loop volume.

  • Page 58: List Of Functions(Print Cst)

    Service Mode Service Mode > Details of Service Mode > #PRINT > List of Functions(PRINT CST) 5-37 ● 180: Temperature adjustment UP/DOWN mode (Special mode N) ● 170: Charging frequency setting The temperature adjustment offset relative to the target temperature of fixing in special mode For a user in an environment where image smear is less likely to occur, frequency can be N can be changed in steps of 3˚C.

  • Page 59: Network

    Service Mode Service Mode > Details of Service Mode > #NETWORK > Configuration 5-38 #NETWORK Setting Default Item Description ranges value ■ Configuration #NETWORK 0 or 1 00 (RW) SNMP (canon_user) access rights bit4=0, bit5=0: RW 0 or 1 Setting Default bit4=0, bit5=1: RO Item...

  • Page 60: Confirmation Of Contents Of Ca Certificate

    Service Mode Service Mode > Details of Service Mode > #CODEC > Details 5-39 #CODEC Setting Default Item Description ranges value ■ Configuration #NETWORK Network debug switch Not used Item Default Setting range Description 0 or 1 NTP polling interval #CODEC SW01- SW09 Not used...

  • Page 61: System

    Service Mode Service Mode > Details of Service Mode > #SYSTEM > Details of Bit Switch 5-40 #SYSTEM Detailed Discussions of Bit 6 When "1" is set, startup is executed in USB import/export mode. ■ Configuration ● SW03 Item Default Description List of Functions #SYSTEM SW...

  • Page 62: Details Of System Numeric

    Service Mode Service Mode > Details of Service Mode > #SYSTEM > Details of System Numeric 5-41 ● SW09 Detailed Discussions of Bit 1 When "1" is set, "Setting screen for date and time" of the installation NAVI can be hidden. List of Functions Function Detailed Discussions of Bit 2...

  • Page 63: Acc

    Service Mode Service Mode > Details of Service Mode > #COUNTER > Counters 5-42 #ACC #COUNTER ■ Configuration ■ Counters The table below gives summary description of the accessories available. This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies.

  • Page 64: Clearing Counters

    Service Mode Service Mode > Details of Service Mode > #LMS > Configuration 5-43 #LMS Parts counter list Item Counter Explanation Service life ■ Configuration DRBL-1 TR-ROLL Transfer roller high-voltage ON count 180,000 SP-SC_EL Separation static charge eliminator high-voltage ON count 90,000 Group Item...

  • Page 65: Outline

    Service Mode Service Mode > Details of Service Mode > #LMS > Inactivity of the transmitted license 5-44 ■ Outline ■ Method of confirming license option 1. Validate an optional function which has been installed but has not been validated based on Confirmation could be made whether the license option is active or not in the SACTIBAT the license key issued by a license issue server (hereinafter called "LMS").
  • Page 66 Service Mode Service Mode > Details of Service Mode > #LMS > Inactivity of the transmitted license 5-45 Take utmost precaution when inactivating the license (6) Press 2 using the numeric key and press the OK key. When invalidating transfer of a license, it is necessary to invalidate the license by entering the CAUTION: service mode and issue a function invalidation certificate key, which certifies that the license has been invalidated.

  • Page 67: Erasing A License

    Service Mode Service Mode > Details of Service Mode > #LMS > Erasing a License 5-46 ■ Erasing a License ● Erasing a License When you invalidate a license option on a temporary basis or when you do not use it for a long period of time, you can invalidate the function by erasing the license.

  • Page 68: E-Rds

    Service Mode Service Mode > Details of Service Mode > #REPORT > Configuration 5-47 #E-RDS #REPORT ■ Configuration ■ Configuration Settings related to e-RDS are described below. The table below lists the kinds of reports that are supported. Item Default Setting range Description Item 1...

  • Page 69: Details

    Service Mode Service Mode > Details of Service Mode > #REPORT > Details 5-48 ■ Details ● System Dump List Use it to check the history of communications, both successful and error. ● System Data List Use it to check the settings associated with the service soft switch and service parameters. 10/16 2009 13:00 0001 CLEAR DATE...

  • Page 70: Counter List

    Service Mode Service Mode > Details of Service Mode > #REPORT > Details 5-49 • Indication sample of "[9]: Total number of occurrences for error code" *1: service error code. *2: START TIME, date and time (in 24-hr notation). #280 …...
  • Page 71 Service Mode Service Mode > Details of Service Mode > #REPORT > Details 5-50 ● Error Log List Jam history description (JAM) Item Explanation 07/12/2005 13:07 FAX Number The larger the number of a jam, the more recently it has occurred. Jam date Date of jam occurrence ***************************************...
  • Page 72 Service Mode Service Mode > Details of Service Mode > #REPORT > Details 5-51 ● Spec List 07/12/2005 13:07 FAX 2009 10/09 16:31 0001 PARAM _ _ _ _ _ TYPE 1 : JP ***************************** OPTION/ENABLE SW *** SPEC REPORT _ _ _ _ _ BDL-IMAGE (1200) OFF / OFF...

  • Page 73: Download

    Service Mode Service Mode > Details of Service Mode > #CLEAR > Configuration 5-52 #DOWNLOAD Group Item Description FMT-SD Format the 512MB SD card. ■ Download 1024 Format the 1204MB SD card. 2048 Format the 2048MB SD card. The following parts of this unit can be upgraded by executing download mode using the CA-KEY Initializes an installed CA certification.

  • Page 74: Display

    Service Mode Service Mode > Details of Service Mode > #TEST MODE > Outline 5-53 #DISPLAY #ROM ■ Configuration ■ Configuration An error code is displayed when a service error has occurred. The E code is displayed in the The table below lists the items of ROM display mode that are supported. upper step, and the detail code is displayed the bottom step.

  • Page 75: Configuration

    Service Mode Service Mode > Details of Service Mode > #TEST MODE > Details 5-54 ■ Configuration Group subgroup Item 1 Item2 Item3 Explanation (3) G3 SIGNAL TX TEST 7200bps Numerals enclosed in parentheses denote a numeric keypad key to be pressed each. (4) G3 SIGNAL TX TEST 9600bps (5) G3 SIGNAL TX TEST TC7200bps Group...
  • Page 76 Service Mode Service Mode > Details of Service Mode > #TEST MODE > Details 5-55 • Numeric keypad key 2 Procedure Checks to see if data can be correctly read from all areas of D-RAM (SDRAM). If an error 1) Enter the PG number with numeric keys, then press the START key. occurs making this check, the test is aborted, with an error appearing on the touch panel 2) Select single-sided (SGL: 0) or double-sided (DBL: 1), then press the START key.
  • Page 77 Service Mode Service Mode > Details of Service Mode > #TEST MODE > Details 5-56 • Numeric keypad key 1 Keypad Frequency The input key and relay are shown below: 462Hz 1100Hz 1300Hz 1500Hz RELAY TEST1 OFF OFF 1650Hz OFF OFF OFF OFF 1850Hz 2100Hz T-5-67...
  • Page 78 Service Mode Service Mode > Details of Service Mode > #TEST MODE > Details 5-57 Tonal/DTMF Signal Reception Test Left/right arrow key Transmission speed A press on '6' on the keypad from the MODEM test menu selects the tonal signal/DTMF signal <...
  • Page 79 Service Mode Service Mode > Details of Service Mode > #TEST MODE > Details 5-58 Sensor test (6-2: SENSOR) Group Item Description Detail This mode is used to verify the status of the unit sensors from the touch panel (LCD) ADF sensor W1: Document Width Detection Sensor 0: OFF, 1: ON...
  • Page 80 Service Mode Service Mode > Details of Service Mode > #TEST MODE > Details 5-59 ADF test <6-4: ADF TEST> Execute the ADF feed test. Select 1-sided/2-sided to execute the test. Panel test <6-7: PANEL TEST> Execute the test for LCD, LED, keys, and coordinate position. Line signal reception test <6-9: LINE DETECT>...

  • Page 81: Installation

    Installation ■ How to Check this Installation Procedure ■ Points to Note at Installation ■ Checking the Contents ■ Check Items when Turning OFF the Power ■ Installation Outline Drawing ■ Installation Procedure ■ Country Settings ■ Basic Setting ■ Communications Test Installation Installation...
  • Page 82 Persons in charge of preparation for launch of this product or quality verification of this draft who belong to one of the following departments Canon Group companies: service administration dept., training development dept., marketing dept. スーパー G3 FAX ボード・AD2 設置手順書...

  • Page 83: When Using The Parts Included In The Package

    Installation > Product Name How to Check this Installation Procedure Product Name Safety regulations require the product's name to be registered. In some regions where this When Using the Parts Included in the Package product is sold, the following name may be registered instead. •...

  • Page 84: Checking The Contents

    Installation > Installation Outline Drawing Checking the Contents < CD/Guides > • FAX Driver CD • FCC/IC sheet (Only for USA) [1] FAX unit X 1 [2] Speaker unit X 1 [3] Telephone Cord • Modular Cable Notice (Only for Europe) (2 Contact type) X 1 Check Items when Turning OFF the Main Power Check that the main power switch is OFF.

  • Page 85: Installation Procedure

    Installation > Installation Procedure > Installing the Fax Unit Installation Procedure 3) Remove the Box Left Cover after putting the Reader Power Supply Cable through the hole of the Box Left Cover. Installing the Fax Unit • 2 Screws 1) Remove all the tapes. NOTE: Reseating of the Reader Power Supply Cable is a work required only on iR-ADV C9075 PRO/C9070 PRO/C9065PRO/C9060 PRO Series and iR-ADV C7065/C7055 Series.
  • Page 86 Installation > Installation Procedure > Installing the Fax Unit 5) Remove the Cover Support Plate. 6) Align the protrusion [B] of the FAX Unit to the rail part [A] of the host machine, and install • 2 Screws (removed screws in step 10.) the FAX Unit.
  • Page 87 Installation > Installation Procedure > Installing the Fax Unit 7) Open the Edge Saddle of Cover Support Plate. Turn over the FAX sheet, and connect the USB Cable 8) Remove the Face Plate of Cover Support Plate. NOTE: • 2 Screws (Do not reuse the Face Plate and the screws, which were removed.) Turn over the FAX sheet only in the case of iR-ADV C9280 PRO/C9270 PRO series and iR-ADV C7280/C7270/C7260 series.
  • Page 88 Installation > Installation Procedure > Installing the Fax Unit Affix the Blanking Seal by aligning it with the mark. (Europe model only) Put the Reader Power Supply Cable throuth the hole of the Box Left Cover, and install the Box Left Cover. (2 Screws) NOTE: Mark Reseating of the Reader Power Supply Cable is a work required only on iR-ADV C9075...

  • Page 89: Installing The Speaker

    Installation > Installation Procedure > Installing the Speaker Installing the Speaker 3) Remove the Toner Container Replacement Unit Inner Cover. • 4 Screws 1) Open the Front Cover and Upper Front Cover. • 2 Claws 爪 F-6-18 F-6-16 4) Remove the cable for the Speaker Unit from the Wire Saddle and close the Wire Saddle. 2) Pull the 2 Hinge Shafts and remove the Upper Front Cover.
  • Page 90 Installation > Installation Procedure > Installing the Speaker 5) Install the FAX Speacker Unit. 7) Connect the Speacker Cable. • 2 Screws (RS tight ; M4x8) • 2 Wire Saddles NOTE: If the Wire Saddle interferes, turn the Wire Saddle and fix it. F-6-20 6) Remove the folding of the Speaker Cable from the machine side from 1 location of the Wire Saddle and close the Wire Saddle.
  • Page 91 Installation > Installation Procedure > Installing the Speaker 8) Install the cover in the Toner Container Replacement Unit Inner Cover. 9) IInstall the Upper Front Cover. (2 Hinge Shafts) Close the Front Cover and the Upper Front Cover. CAUTION: • When installing, be sure to install the Toner Container Replacement Unit Inner Cover while the 4 Parallel Pins of the Inner Door Link Shaft are tilted at an angle of approx.

  • Page 92: Operation Setting

    Installation > Operation Setting > Basic Setting Operation Setting Insert the power plug into the outlet. Turn ON the main power switch. Type Setting Select the country/region of the FAX Board in Service Mode: FAX > TYPE > TYPE Affix the FAX Approval Label in the position shown in the figure. This setting performs the parameter settings to match the communication specification of the [1] : For USA, Europe country/region.

  • Page 93: Fax Communication Test

    Installation > Operation Setting > Fax Communication Test Fax Communication Test Perform the communication test to check if FAX function works Correctly. 1) Switch the control panel display to Send/Fax display. 2) Send the test document from this machine to another machine that can handle the communication test to check that this machine can send the data correctly.

Table of Contents