Table of Contents
Advertisement
3.AUTO REDIAL
ON
OFF
4.BATCH TX
ON
OFF
5.QUICK ON-LINE TX
ON
OFF
6.TIME OUT
ON
OFF
Chapter 16
Select whether to perform automatic redial when the other
line is busy or no answer. (➞6-20)
Customize the redial operation.
1. REDIAL TIMES
Even if the fax machine is set to redial several times, it will
redial only once if there is no tone or there is a ring back
tone during the first attempt.
2. REDIAL INTERVAL
After the first attempt at dialing fails, re-dialing is not
attempted.
If there is more than one document waiting in the memory
to be sent to the same destination, after the timer goes off
to send the first document, then all documents are sent
together in the same transmission. With this feature the fax
unit makes one phone call instead of faxing each docu-
ment with a separate phone call. This feature saves time
and money. (➞16-34)
Turn quick memory sending off and on. When ON is
selected, the fax unit starts sending the document while it
is still being scanned. (➞6-13)
Set the interval between dialing (entering phone numbers)
when sending to more than one destination. (➞6-22)
Fax scans the document in 5 or 10 seconds after you enter
the phone number.
Press
to begin transmission. Otherwise, the fax
Start/Scan
unit returns to standby.
From 01 to 10 times.
(02TIMES)
From 02 to 99 minutes.
(02MIN.)
Summary of Important Settings
16-11
Advertisement
Table of Contents
