Table of Contents
Advertisement
❏
Are the documents you send too light?
Is the Lighter indicator on your operation panel on?
Is your document too light?
Is the scanning glass on your fax clean?
❏
Cannot perform relay sending?
Does the relay unit support ITU-T subaddress/password transac-
tions?
Has the relay unit set up a relay group correctly?
Does the ITU-T subaddress/password match those of the relay
unit?
Is the memory of the relay unit full?
❏
Cannot perform confidential sending?
Does the other fax support ITU-T subaddress/password transac-
tions?
Has the other party set up a confidential mailbox?
Chapter 15
Press the
button until Standard or Darker is selected.
Contrast
(➞6-5)
Press the
button until Darker is selected then try send-
Contrast
ing again. (➞6-5)
Copy a document on your fax and see if the copy is streaked or
dirty. If the copy is streaked or dirty, clean the scanning glass.
(➞15-32)
If the relay unit does not support ITU-T subaddress/password
transactions, you cannot perform relay sending.
The relay group must be set up correctly on the relay unit and
the relay unit must tell you the subaddress and password. If the
relay unit has set an ITU-T password, then you must send the
document with the correct password as well as the correct
subaddress. (➞9-10)
Make sure you set the correct subaddress/password. (➞9-10)
Check with the relay unit and make sure there is enough
memory to receive your document. Ask the relay unit to clear
their memory then try again.
If the other fax does not support ITU-T subaddress/password
transactions, you cannot perform confidential sending.
The other party must set up a confidential mailbox on the other
fax and tell you the subaddress and password. If the other party
has set an ITU-T password, then you must send the document
with the correct password as well as the correct subaddress.
(➞10-10)
Maintenance & Frequently Asked Questions
15-43
Advertisement
Table of Contents
