Table of Contents
Advertisement
Memory Lock Setup Summary
The default settings, shown in bold, remain in effect unless you change them.
1.MEM LOCK PASSWORD
2.REPORT
3.TIME SETUP
Chapter 13
This password protects the memory lock settings. You must
also use this password to unlock the memory so you can
print documents stored in the memory. Use the buttons on
the numeric keypad to enter a four-digit password and
press
.
Set
Set the fax to print reports or not. This setting affects only
reports that print automatically, such as Activity Reports for
sending and receiving, and Activity Management Reports.
OUTPUT NO
No report prints while in the memory
lock mode.
OUTPUT YES
A report prints while the fax is in the
memory lock mode.
Set the times for the fax to enter and leave the memory lock
mode. The time settings are optional. If you do not set the
times, you can use the
memory lock feature on and off.
OFF
Turns off the timer setup. You can turn
the memory lock mode on and off with
the
ON
Turns on the timer setup. You can still
use the
the memory lock mode on and off.
1. START TIME
Sets the time for the fax to enter the
memory lock mode.
EVERYDAY
Set the time in 24-hour format. Up to 5
starting times can be specified for every
SELECT DAYS
day or each selected day.
2. END TIME
Sets the time for the fax to leave the
memory lock mode.
EVERYDAY
Set the time in 24-hour format. Up to 5
starting times can be specified for every
SELECT DAYS
day or each selected day.
0000 to 9999
button to turn the
Memory Reception
button.
Memory Reception
Memory Reception
Restricting Use of the Fax
button to turn
13-19
Advertisement
Table of Contents
