Canon 3170 Series User Manual page 180

Set
Use regular dialing with the numeric keypad to dial up to 10
ABC DEF
1 2 3
destinations, but make sure that you press
GHI JKL M NO
you enter with regular dialing.
4 5 6
PRS TUV WXY
8 9
7
You can also press the
OPER SYMBOLS
0 dialed with the numeric keypad.
Tone
You must dial the second number within 5 seconds of dialing the first
number. All subsequent numbers must be dialed within 10 seconds. If
you wait longer than the timeout interval before dialing the next number,
the fax will start scanning the document. The timeout interval can be
turned off. (➞16-11)
Start / Scan
After you have entered all of the numbers, press
3.
Regardless of the order you used when dialing, the fax will send the
document to the locations you entered in this order: One-touch Speed
Dialing numbers, Coded Speed Dialing numbers, then regular dial
numbers.
To cancel sequential broadcasting
To cancel a sequential broadcast, press
Stop
After CANCEL DURING TX/RX is displayed, press
nations are canceled.
Chapter 6
Set
button to redial the last number
Redial
.
Stop
Sending Documents
after each number
.
Start/Scan
. All desti-
*
6-23