Changing the Remote Receive ID
Follow this procedure to change the remote receive ID.
1. Open the RX SETTINGS menu.
Open all three of the One-touch Speed Dialing panels. Then press
Data Registration
Data
Registration
Set
Press
Press the search buttons until you see the display below.
Set
Press
2. Press the search buttons until you see the display below.
Set
3.
Press
If OFF is displayed, press the search buttons until you see ON.
Chapter 7
.
REGISTRATION
1.DATA REGISTRATION
.
Set
DATA REGISTRATION
1.USER SETTINGS
DATA REGISTRATION
4.RX SETTINGS
.
Set
RX SETTINGS
1.ECM RX
RX SETTINGS
3.REMOTE RX
.
Set
REMOTE RX
ON
Receiving Documents
7-9