Save the protective bag and all other shipping material. You will need
this material later when you dispose of the cartridge after it has run out
of toner. (➞15-18)
3. Hold the cartridge by the ends and rock it gently five or six times
4. Place the new cartridge on a stable, flat, clean surface, and snap
5. As you steady the cartridge with one hand, remove the seal by
• Do not pull the tab upwards or downwards; the tape may break.
• If the tab breaks off from the tape, pull the tape out by pulling on the
end of the tape where the tab was originally attached.
• Wash off any toner from your hands or clothing immediately with cold
water.
2-24
Setting Up
to distribute the toner evenly inside the cartridge.
the tab to detach it from the cartridge.
gently pulling the plastic tab with your other hand. Use a firm,
even pull to avoid breaking the seal.
PULL STRAIGHT OUT
Chapter 2