Installing the Connecting Links
Note: The connecting links are part of the optional tow pole
kit.
1. Align the connecting link to the last link in one end of
the safety chain
(Figure
2. Insert the connecting link through the chain link until
the connecting link snaps closed.
3. Repeat steps
1
and
in the other end of the safety chain.
4
Adjusting the Mixing Paddles
No Parts Required
Procedure
If the mixing paddles and wipers need adjustment, adjust the
paddles and wipers; refer to
5D).
2
to install the other connecting link
Adjusting the Paddles (page
Product Overview
1. Rear cowl
2. Front cowl
29).
3. Grate
4. Bag splitter
5. Dump handle
6. Grate lift arm
9
Figure 6
7. Clutch lever
13. Chute
8. Dump latch
14. Axle
9. Front post
15. Wheel
assembly
10. Tow pole
16. Cowl latch
11. Safety-chain
keyhole
12. Drum