Setup - Toro 03781 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Material
Declaration of Conformity
Note: Determine the left and right sides of the machine from the normal operating position.
Description
No parts required
Warning decal
Hood lock bracket
Rivet
Screw, 1/4 x 2 inch
Flat washer, 1/4 inch
Locknut, 1/4 inch
Front hose guide-R.H.
Front hose guide-L.H.
No parts required
Cutting unit kickstand
No parts required
No parts required
Gauge bar
Qty.
–
1
1
2
1
2
1
1
1
–
1
–
–
1
Qty.
1 Read before operating machine
1 Read before operating engine
1 Use to reference part numbers
1 View before operating machine
1 Use for CE Compliance
13
Use
Adjust the support rollers
Used only on machines requiring CE
Compliance.
Used only on machines requiring
European CE Compliance.
Install the cutting units
Adjust the turf compensation spring.
Install the Cutting Unit Kickstand.
Grease the machine.
Check the rear axle lubricant, hydraulic
fluid, and engine oil levels
Use the gauge bar to adjust the cutting
unit.
Use