Maintenance; Recommended Maintenance Schedule(S); Daily Maintenance Checklist - Toro Groundsmaster 3200 Series Operator's Manual

Maintenance

Note:
Determine the left and right sides of the
machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 400 hours

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the condition of the
blades
Lubricate all grease fittings
Touch-up damaged paint
1. Immediately after every washing, regardless of the interval listed.
Notation for Areas of Concern
Inspection performed by:
Item
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Tighten the castor wheel nuts.
• Check the PTO driveshaft-to-gearbox fastener torque.
• Tighten the castor wheel nuts.
• Change the gearbox lubricant.
• Lubricate the castor arm bushings.
• Clean the cutting unit.
• Lubricate the grease fittings. Lubricate the grease fittings immediately after every
washing.
• Check the gearbox lubricant.
• Tighten the castor wheel nuts.
• Check the blade drive belt adjustment.
• Clean under the cutting unit belt covers.
• Check the PTO driveshaft-to-gearbox fastener torque.
• Change the gearbox lubricant.
For the week of:
Mon. Tues.
1
Wed. Thurs.
Date Information
15
Fri. Sat. Sun.