Table of Contents
Advertisement
INTERLOCKED SETTING
INTERLOCKED
UNIT ADDRESS
UNIT ADDRESS
INTERLOCKED SETTING
INTERLOCKED
UNIT ADDRESS
UNIT ADDRESS
001
002
003
MENU
1 GROUP SETTING
2 INTERLOCKED
SETTING
3 REFRIGERANT
MONITOR
4 MALFUNCTION
MONITOR
5 USER SETTING
Note:
The interlocked operation settings cannot be adjusted when this unit is set to being a slave system controller by the DIP
switch No. 2. However, monitoring of the contents of the interlocked operation settings is possible.
Please refer to the related documentation for details about the centralised controller.
6 Use the numeric keypad to set the address of the indoor unit to operate with
the displayed Lossnay unit.
005
Operation example
For an indoor unit with an address of 012.
1) Input "0".
2) Input "1".
3) Input "2".
4) Press the
When the input is incorrect
Press the
RESET
7 Set the indoor units to operate with the displayed interlocked Lossnay unit.
8 Repeat operation 5 to 7 to set the indoor units in interlocked operation con-
trolled by this controller.
005
9 When all settings are completed, press the
004
Initial setting screen is displayed.
This ends the interlocked operation setting.
Return to where user operations are performed to set DIP switch No. 1 to OFF.
After the initial settings processing has been completed, the initial setting screen
will be displayed.
0
01
012
button.
* It is also possible to enter "1" "2".
button and continue to input the data. After pressing the
button, move the cursor to the addresses to be deleted and press the
button to delete these addresses.
DEL.
012
BACK
button.
SCREEN
187
Advertisement
Table of Contents
